All Products

24K ohm resistor with a tolerance of 5% and power rating of 0.25W(1/4Watt). These resistors are axial through-hole type resistors so ideal for breadboard applications and through-hole circuit board projects.24k Ohm Resistor in PTH package with the following specificationsResistance: 24K OhmsToleranc..

24LC512 - 512 Kbit Serial I2C Bus EEPROMThe 24LC512  is a 512Kb (64K x 8) Serial Electrically Erasable PROM (EEPROM), capable of operation across a broad voltage range (2.5V to 5.5V). It has been developed for advanced, low-power applications such as personal communications and data acquisition. Thi..

25 Amp Glass Cartridge FuseA fuse  is a type of low resistance resistor that acts as a sacrificial device to provide overcurrent protection, of either the load or source circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, interrupting the circ..

25 Watt Pointed Tip for Soldering IronThis is a 25 Watt pointed tip; it can be used with any standard 25 W soldering iron. This tip is particularly useful for SMD and low heat required through hole soldering applications. ..

25W 3mm Bit (Soldering Iron Tip)Good quality Soldering Iron. This is a Nickel Plated 3mm 25 Watt Chisel tip; it can be used with any standard 25 W soldering iron...

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element.Carbon film resistors are a fixed form type resistor. They are constructed out of a ceramic carrier with a thin pure carbon film around it, that functions as restive material.Resistor..

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element.Carbon film resistors are a fixed form type resistor. They are constructed out of a ceramic carrier with a thin pure carbon film around it, that functions as restive material.Resistor..

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element.Carbon film resistors are a fixed form type resistor. They are constructed out of a ceramic carrier with a thin pure carbon film around it, that functions as restive material.Resistor..

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element.Carbon film resistors are a fixed form type resistor. They are constructed out of a ceramic carrier with a thin pure carbon film around it, that functions as restive material.Resistor..

28 Pin IC Base (Narrow) (DIP Socket)This is a 28 pin IC base with pins. Use this IC base for easily plugging in and out your IC during prototyping. Also use these IC bases to protect your IC from damage due to heat while soldering by first soldering the base to tboard and then plugging in the IC lat..

28 Pin ZIF SocketZIF Sockets make it easy to add and remove ICs from boards. Perfect for use with ICs that require frequent changing. Comes with a armature that can be used to lock and unlock the IC to the base...