Any order between 23-Sep-2017 to 1-Aug-2017 will be shipped at 2-Aug-2017
If you not find your right product!      Write us email at   sales@component7.com.

XBEE Base Board USB

XBEE Base Board USB

XBEE Base Board USB

This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.

The highlight of this board is an FT231X USB-to-Serial converter. That’s what translates data between your computer and the XBee. There’s also a reset button, and a voltage regulator to supply the XBee with plenty of power. In addition, there are four LEDs that’ll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator.

This board also breaks out each of the XBee’s I/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire.

With the aid of our XBEE USB Wireless Module customers can easily communicate between PC to PC or PC to embedded boards. These modules are highly suitable for changing the modules of varied devices using PC through USB port. We have equipped the adapters of these modules with five indicator LED's for depicting the status of the data being received or transmitted, power, signal strength of the recipient and other associated data.

 

Specification:

•USB 2.0 compatible (No legacy RS232 required)
•USB powered
•RXD, TXD, RSSI, ASSOSIATE indicator LEDs
•Supports AT and API commands
•Achievable data rates: 2400-115200 bps
•Data output: CMOS(2.8-3.4V) UART interface
•Supported XBee wireless module
•Supported operating systems


Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 880
  • Product Code: XBEE Base Board USB
  • Availability: In Stock
  • Rs300.00

Tags: xbee, base, board, usb, rf, device, communication, robot, kit

XBEE Base Board RS232This is the base board which is used to connect the Zigbee to PC directly. whic..
Rs300.00

Xbee Pro (S2B) 63mw Wireless Communication Module (Wire antenna)The new XBee   Series 2B improv..
Rs2,300.00