If you not find your right product!      Write us email at   sales@component7.com.

USB to Serial Converter

USB to Serial Converter

USB to Serial Converter


This  is a highly integrated USB to UART Bridge Controller providing a simple solution for updating RS-232 designs to USB using a minimum of components and PCB space. The CP2102 includes a function controller USB 2.0 full-speed , USB transceiver, oscillator, EEPROM, and asynchronous serial data bus (uart) With full modem control signals in a compact package 5x5milímetros MLP-28. No other external USB components are required.

   However because of its small size, and it is also a MLP, A certain degree of technical difficulty in welding. So we created this compact USB-uart module leads to interface including 5V , TXD , RXD , GND , CTS , RTS , which txd, RXD can connected directly to the MCU serial port, RXD for MCU-TXD , TXD to MCU- RXD , It can also be connected to the Bluetooth module, GPS and other serial devices, RTS and CTS signals handshake as for special occasions, you generally unnecessary, easier to debug the initial product. LED mounted on the unit after the often bright. The module uses USB male seat, can be connected directly to the PC USB seat can also be connected to a USB extension line port.


 Feature:

  • Single-chip USB UART data transfer
    • Integrated USB transceiver; no external resistors required
    • Integrated clock; no need external crystal
    • Integrated 1024-Byte EEPROM for vendor, product ID, serial number, power descriptor, release number, and product description strings
    • On-chip power-on reset circuit
    • Voltage regulator on-chip: 3.3V output
    • 100% pin and software compatible with CP2101
  • USB function controller
    • USB specification 2.0 compliant; Full-Speed ​​(12 Mbps)
    • USB suspend states supported via SUSPEND pins
  • Virtual COM port device drivers
    • It works with PC applications with existing port
    • Royalty-Free distribution license
    • Windows 98 SE / 2000 / XP
    • MAC OS-9
    • Mac OS-X
    • 2.40 and more Linux
  • Usbxpress ™ direct driver support
  • Supply Voltage
    • Self-Powered: 3.0 to 3.6 V
    • USB bus: 4.0 to 5.25 V
Application:
  • RS-232 upgrade for legacy USB devices
  • USB interface cable cell phone
  • PDA USB interface cable
  • USB to RS-232 Serial Adapter
Care:
  • Note: This product only just to make your more than one serial port on your computer, with a variety of serial devices such as GPS, satellite receiver, hard disk, Bluetooth modules and other media.

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 767
  • Product Code: USB to Serial Converter
  • Availability: In Stock
  • Rs185.00

Tags: usb, serial, converter, usb to serial, communication, robot, kit

A resistor is a passive two-terminal electrical component that implements electrical resistance as a..
Rs1.00

A resistor is a passive two-terminal electrical component that implements electrical resistance as a..
Rs1.00