CP2102-GM SINGLE-CHIP USB TO UART BRIDGEThe CP2102 is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS-232
designs to USB using a minimum of components and PCB space. The CP2102 includes a USB 2.0 full-sp..
FT232BL-USB to serial UART interfaceThe FT232B is a lead free version of the
2nd generation of FTDI’s USB to serial UART interface device which simplifies
USB to serial designs. This device not only adds extra functionality to its
FT232RL - USB to Serial UART interfaceThe FT232R is USB UART interface Integrated Circuit Devices; USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are available, in addition. FT..
L293D Motor Driver ICThe L293 and L293D are quadruple high-current half-H drivers. The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents..
L297-Stepper Motor ControllerThe L297 Stepper Motor Controller is primarily intended for use with anL298Nor L293Ebridge driver in stepper motor driving applications. It receives control signals from the system’s controller, usually a microcomputer ch..
L298N Full-Bridge Motor Driver ICThe L298 is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels anddrive inductive lo..
LM3914 Dot or Bar Display Driver ICGeneral Description
The LM3914 is a monolithic integrated circuit that senses
analog voltage levels and drives 10 LEDs, providing a linear
analog display. A single pin changes the display from a moving
dot to a ..
MAX232 dual driver & receiverThe MAX232 by Maxim Integrated Circuits converts signals from an RS-232 serial port to signals suitable for use in compatible digital logic circuits. The MAX232 is a dual driver/receiver and typically converts the RX,..
MAX232 SMD Drivers & ReceiversThe MAX232 by Maxim Integrated Circuits converts signals from an RS-232 serial port to signals suitable for use in compatible digital logic circuits. The MAX232 is a dual driver/receiver and typically converts the RX..
MAX3232, 3.0V - 5.5V 1Mbps, RS-232 Transceivers -SMDThis RS232 converter IC has low drop out transmitter output stage enabling true RS-232 performance from a 3.0V to 5.5V supply with a dual charge pump. The devices require only four small 0.1µF exter..
MAX485 - RS-485/RS-422 Transceiver ICThe MAX485 is low-power transceivers for RS-485 and RS- 422 communication. The IC contains one driver and one receiver. The driver slew rates of the MAX485 is not limited, allowing them to transmit up to 2.5Mbps. ..
MAX487 - RS-485 RS-422 TransceiverThe MAX487 is low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX487 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused b..
PL2303HX USB-to-Serial Bridge ControllerThe PL-2303HX is a low cost and high performance USB-to-Serial Bridge Controller. The PL-2303HX provides a convenient solution for connecting an RS-232 like full-duplex asynchronous serial device to any Univers..
SN75176 DIFFERENTIAL BUS TRANSCEIVERThe SN75176BP differential bus transceiver is an integrated circuits designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet AN..