Any order between 12-10-2017 to 1-11-2017 will be shipped at 2-11-2017
If you not find your right product!      Write us email at   sales@component7.com.

L293D Motor Driver IC

L293D Motor Driver IC

L293D Motor Driver IC

The L293 and L293D are quadruple high-current half-H drivers. The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. Both devices are designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-currenthigh-voltage loads in positive-supply applications.

All inputs are TTL compatible. Each output is a complete totem-pole drive circuit, with a Darlington transistor sink and a pseudo Darlington source. Drivers are enabled in pairs, with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. When an enable input is high, the associated drivers are enabled, and their outputs are active and in phase with their inputs. When the enable input is low, those drivers are disabled, and their outputs are off and in the high-impedance state. With the proper data inputs, each pair of drivers forms a full-H (or bridge) reversible drive suitable for solenoid or motor applications.

Feature:

•   Featuring Unitrode L293 and L293D Products Now From Texas Instruments
•   Wide Supply-Voltage Range: 4.5 V to 36 V
•   Separate Input-Logic Supply
•   Internal ESD Protection
•   Thermal Shutdown
•   High-Noise-Immunity Inputs
•   Functionally Similar to SGS L293 and SGS L293D
•   Output Current 1 A Per Channel (600 mA for L293D)
•   Peak Output Current 2 A Per Channel (1.2 A for L293D)
•   Output Clamp Diodes for Inductive Transient Suppression (L293D)

Specification:

IC, RELAY DRIVER QUAD, DIP16, 293

• Motor Type: Half-H
• No. of Outputs: 4
• Output Current: 2A
• Output Voltage: 39V
• Supply Voltage Range: 4.5V to 36V
• Driver Case Style: DIP
• No. of Pins: 16
• Operating Temperature Range: -40°C to +150°C
• SVHC: No SVHC (18-Jun-2012)
• Base Number: 293
• Device Marking: L293NEE4
• Device Type: Motor
• IC Generic Number: 293
• Logic Function Number: 293
• No. of Channels: 4
• No. of Drivers: 4
• Operating Temperature Max: 150°C
• Operating Temperature Min: -40°C
• Output Current Max: 2A
• Output Voltage Max: 36V
• Package / Case: DIP
• Supply Voltage Max: 36V
• Supply Voltage Min: 4.5V
• Termination Type: Through Hole

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 1022
  • Product Code: L293D Motor Driver IC
  • Availability: In Stock
  • Rs45.00
  • 5 or more Rs42.00
  • 10 or more Rs39.00
  • 100 or more Rs35.00

Tags: l293d motor driver ic, l293d, motor, semiconductor, ic, interface, driver

L297-Stepper Motor ControllerThe L297 Stepper Motor Controller is primarily intended for use with an..
Rs95.00

16 Pin IC Base (DIP Socket)This is a 16 pin IC base with pins.Use this IC base for easily plugging i..
Rs3.00

Relimate is a connector which is used to connect wire to wire or wire to board connections.Relimate ..
Rs1.00

Relimate is a connector which is used to connect wire to wire or wire to board connections.Relimate ..
Rs2.50

Component7 provide  general purpose terminal block of  3 Pin PCB type connector with screw..
Rs16.00

LM35D-Temperature Sensor -13%
LM35D-Temperature SensorLM35 is the sensor which senses the temperature and gives the..
Rs45.00 Rs39.00