If you not find your right product!      Write us email at   sales@component7.com.

Ferrous Chloride (FeCl2) For PCB Etching 75 gms Pack

Ferrous Chloride (FeCl2) For PCB Etching 75 gms Pack

Ferrous Chloride (FeCl2) For PCB Etching 75 gms Pack

Ferrous Chloride (FeCl2) solution is used to etching Copper from Copper Clad to make the PCB. Ferrous Chloride (FeCI2) which is corrosive and one should avoid skin and eye contact. Use of glasses, gloves and protective overalls are strongly recommended. If you do get any on your skin then wash it off immediately with water and soap. Seek medical attention in abnormal situations. 

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 960
  • Product Code: Ferrous Chloride (FeCl2) For PCB Etching 75 gms Pack
  • Availability: Out Of Stock!
  • Rs40.00
  • 10 or more Rs359.00
This product has a minimum quantity of 6

Tags: ferrous, chloride, fecl2, pcb, etching, 75, gms, pack, tool, accessories

Double Sided Copper Clad for PCB 6x6 inchesA 1/32 inch laminates with 1 ounce copper per square foo..
Rs70.00

General Purpose Dot Matrix PCB 6x4 inches (Perforated Board)This is a good quality medium size..
Rs35.00

General Purpose Dot Matrix PCB 4x4 inchesThis is a good quality medium size (4x4 inch) single si..
Rs25.00

22 uH 1A Power Inductor Tolerance +/- 10%Product Name : Power InductorInductance : 22uHLead Diameter..
Rs9.00

A resistor is a passive two-terminal electrical component that implements electrical resistance as a..
Rs0.40

PCB Mount Goli BuzzerThis is a small Buzzer, which can be mount on PCB. It has two pins; the bigg..
Rs8.50

This is a simple SPDT PCB mount switch - great for use as an ON/OFF button, or just as a general con..
Rs9.00