Any order between 10 March 2018 to 16 March 2018 will be shipped at 17 March 2018.
Are you Facing trouble in finding your product?      Please write us email at

DIY Arduino Starter Kit with Arduino UNO R3 board

DIY Arduino Starter Kit with Arduino UNO R3 board

DIY Arduino Starter Kit with Arduino UNO R3 board

This Arduino starter kit gives you to freedom for making so many Arduino DIY projects. This kit contains most common and very useful electronic components like Uno r3, breadboard,  assorted resistors, LCD display, assorted LEDs, jumper wires etc.

DIY Arduino Starter Kit with Arduino UNO R3 board contains the following items

  • Arduino UNO R3
  • 16x2 LCD
  • Straight single line pinhead connectors-2
  • 10K Ohm Resistors 1/4W
  • 1M Ohm Resistor 1/4W
  • 220 Ohm Resistors 1/4W
  • 330 Ohm Resistors 1/4W
  • 1k Ohm Resistor 1/4W
  • 33K Ohm Resistors 1/4W
  • 47k Ohm Resistors 1/4W
  • 100nF capacitor ceramic
  • 10nF capacitor ceramic
  • 100uF electrolytic capacitor 25Vdc
  • 5mm LDR
  • 5mm RED LED
  • 5mm GREEN LED
  • 5mm YELLOW LED
  • 5mm white LED
  • 10K ohm potentiometer
  • 2 Pin PCB Screw terminals
  • BC547 Transistor in TO92 Package
  • Piezo buzzer
  • PCB Pushbutton,
  • 4N35 Optocoupler
  • Diode 1n4007
  • MOS IRF520
  • Servo Motor
  • DC motor shift resistor IC 74HC595
  • 5 v relay
  • IR transmitter & receiver
  • Jumper Wire-20cm (Male-Male)
  • Battery Snap Cap
  • Breadboard
  • USB Cable-B Type

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 4876
  • Product Code: DIY Arduino Starter Kit with Arduino UNO R3 board
  • Availability: In Stock
  • Rs1,199.00

Tags: Arduino UNO R3, 16x2 LCD, Straight single line pinhead connectors-2, 10K Ohm Resistors 1/4W, 1M Ohm Resistor 1/4W, 220 Ohm Resistors 1/4W, 560K Ohm Resistors 1/4W, 1k Ohm Resistor 1/4W, 1m Ohm Resistors 1/4W, 47k Ohm Resistors 1/4W, 100nF capacitor polyester, 10nF capacitor polyester, 100uF electrolytic capacitor 25Vdc, 100K Ohm LDR VT90N2, 5mm RED LED, 5mm GREEN LED, 5mm YELLOW LED, 5mm white LED, RGB LED, 10Kohm potentiometer, PCB terminals, BC547 Transistor in TO92 Package, Piezo buzzer, Pushbutton, 4N35 Optocoupler, Diode 1n4007, MOS Irf520, Servo Motor, DC motor shift resistor, 5 v relay, IR transmitter & receiver, Jumper Wire-20cm (Male-Male), Battery Snap Cap, Breadboard, USB Cable-B Type

A breadboard (proto board) is a construction base for prototyping of electronics. The term is common..

1 Pin Jumper Wire (Female) Single Side Connector -29%
These premium jumper wires are stranded 26 AWG wires with female terminations on one ends, fo..
Rs4.50 Rs3.20

1 Pin Jumper Wire (Male) Double Sided Connector -29%
This jumper wire stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 ..
Rs4.50 Rs3.20

5 mm Green LEDThis is the very common LEDs which is used in all types of electronic proje..

Features:Pitch Diameter=40 mm.Length=32mm.Center Shaft Diameter=6 mm.Applications:Gate control mecha..