Any order between 10 March 2018 to 16 March 2018 will be shipped at 17 March 2018.
Are you Facing trouble in finding your product?      Please write us email at

BQ2057 Battery Charger IC (8.4V) Li-Ion, Li-Pol

-5% BQ2057 Battery Charger IC (8.4V) Li-Ion, Li-Pol

The  bq2057 series advanced Lithium-Ion (Li-Ion)and Lithium-Polymer (Li-Pol) linear charge-management ICs are designed for cost sensitive and compact portable electronics. They combine high-accuracy current and voltage regulation, battery conditioning, temperature monitoring, charge termination, charge-status indication, and AutoComp charge-rate compensation in a single 8-pin IC. MSOP, TSSOP, and SOIC package options are offered to fit a wide range of end applications. The bq2057 continuously measures battery temperature using an external thermistor. For safety, the bq2057inhibits charge until the battery temperature is within user-defined thresholds. The bq2057 then charges the battery in three phases: conditioning, constant current, and constant voltage. If the battery voltage is below the low-voltage threshold, V(min), the bq2057 precharged using a low current to condition the battery. The conditioning charge rate is approximately 10% of the regulation current. The conditioning current also minimizes heat dissipation in the external pass element during the initial stage of the charge. After conditioning, the bq2057 applies a constant current to the battery. An external sense-resistor sets the current. The sense-resistor can be on either the high or low side of the battery without additional components. The constant-current phase continues until the battery reaches the charge-regulation voltage.


  • Battery Charge Voltage: 8.4V
  • Battery IC Case Style: SOIC
  • Battery Type: Li-Ion, Li-Pol
  • Charge Current Max:2A
  • Input Voltage: 15V
  • MSL: MSL 1 - Unlimited
  • No. of Pins: 8
  • No. of Series Cells:2
  • Operating Temperature Max: 70°C
  • Operating Temperature Min: -20°C
  • Packaging: Each


  • Ideal for Single(4.1 V or 4.2 V) and Dual-Cell (8.2 V or 8.4 V) Li-Ion or Li-Pol Packs
  • Requires SmallNumber of External Components
  • 0.3 V dropout voltage for Minimizing Heat Dissipation
  • Better Than ±1%Voltage Regulation Accuracy With Preset Voltages
  • AutoComp™ DynamicCompensation of Battery Pack’s Internal Impedance to Reduce Charge Time
  • OptionalCell-Temperature Monitoring Before and During Charge
  • Integrated Voltage and Current Regulation With Programmable Charge-Current and High-or Low-SideCurrent Sensing
  • Integrated CellConditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation During Initial Stage Of Charge
  • Charge status output for Single or Dual Led or Host Processor Interface
  • Automatic Battery-RechargeFeature
  • Charge Terminationby Minimum Current
  • AutomaticLow-Power Sleep Mode When VCC Is Removed
  • EVMs Available for Quick Evaluation
  • Packaging: 8-PinSOIC, 8-Pin TSSOP, 8-Pin MSOP

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 3055
  • Product Code: BQ2057 Battery Charger IC
  • Availability: In Stock
  • Rs100.00
  • Rs95.00

Tags: bq2057wsn, 2057, wsn, smd, battery, charger, ic, 8.4v, 8.4, volt, li-ion, li-pol, power, product, power converter

The BENCHMARQ bq2057 series advanced Lithium-Ion (Li-Ion) and Lithium-Polymer (Li-Pol) linear charge..

The bq2404x series of devices are highly integrated Li-Ion and Li-Pol linear chargers devices target..