Any order between 23-Sep-2017 to 1-Aug-2017 will be shipped at 2-Aug-2017
If you not find your right product!      Write us email at   sales@component7.com.

1 Watt (Blue) LED with Heat Sink

1 Watt (Blue) LED with Heat Sink

1 Watt (Blue) LED with Heat Sink

Make a 1 Watt LED flashlight or a headlamp with this ultra-bright LED. The LED is very bright, with 140 degree lambertian pattern. Compared to most LEDs, you would say this is 30,000 millicandela. Either way, its incredibly bright! The output is a 'cool' 6000K pure white, not a 'warm' incandescent-looking white.
The LED is mounted onto an aluminum PCB for heatsinking, and it also makes it easy to solder in. Simply connect to the big + and - pads on the PCB (there are two of each).
The best way to drive these LEDs is constant current, @ 350 mA, but you can get away with under-driving for compactness. At about 3V, the LED draws ~200 mA, so connect two Alkaline batteries up directly with no resistor for a basic bright lamp. You can also try driving it directly with a 3.3V power supply.

Features:

  • Heat Sink Design Includes space for Screw 
  • Expected life 50000+ hours*
  • Low Power Drainage.
  • High Brightness
  • Low Forward Voltage
  • Become Future Ready with High Brightness One Watt White L.E.D.'s

Specifications:

  • Size: 1W Star LED
  • Color: Blue
  • Luminosity/Brightness: 30 lm (Lumens)
  • Forward Voltage: 3.2-3.4v
  • Current: 350mA
  • Wavelength: 460-465nm
  • Viewing Angle: 140 Degrees
  • Mount Style: Surface Mount
  • Lens Color: Clear
  • LED Brightness Class: Super/Ultra/Extreme

Applications:

  • Home/Shop/Showcase/Auto/Aquarium Lighting.
  • Very Easy to Assemble and Run.
  • High Brightness.
  • Low Power Consumption than filament based bulbs
  • Comes with Star Base Heat-Sink
  • Heat-Sink with Slot for Screw.
  • Can Be used with multiple requirements using proper Resistors (Sold Separately).
  • Instantaneous Lighting

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 1206
  • Product Code: 1 Watt (Blue) LED with Heat Sink
  • Availability: In Stock
  • Rs12.00

Tags: 1 watt led, star led, power led

1 Watt (White) LED with Heat SinkMake a 1 Watt LED flashlight or a headlamp with this ultra-bright ..
Rs12.00

1-3 Watt LED DriverAn LED driver is an electrical device which regulates the power to an LED or a ..
Rs149.00

1 Watt (Green) LED with Heat SinkMake a 1 Watt green LED flashlight or a headlamp with this ultra-b..
Rs12.00

3 Watt (Blue) LED with Heat SinkThe 3 watt blue  LED is a very bright light with a vibrant col..
Rs65.00

Features of 39 OHM-1Watt ResistorA resistor is a passive two-terminal electrical component..
Rs1.00

This 9 Volt Battery snap connector is used to hold 9V batteries on one side and on another side two ..
Rs6.50

3 mm Blue Round Top LEDThe blue color 3mm round top LED is a vibrant color that you can't go wrong ..
Rs0.90

3 mm Blue Oval LEDThis is the very common LEDs which is used in all types of electro..
Rs1.00

Solder Wire 50gIf you want to make a kit you'll need some solder. This  50 gram is a good amoun..
Rs75.00

This is a simple soldering iron stand stable well supported metal base low cost soldering iron stand..
Rs49.00